-
$278.50CastaCure 100 – Concrete Curing Technology
CastaCure100 is an advanced spray on, colloidal silica based concrete curing technology, compliant with the moisture retention requirements of AS 3799 and ASTM C309 as required in NZS 3109.
-
$1,028.09CastaCure Blankets
Inforce’s synthetic wet curing blankets provide a consistent controlled moisture environment for optimal concert slab curing.
-
$206.15Anti-Vap Retarder
Anti-Vap Retarder is a Surface-Active Agent in water solution, used to reduce the water evaporation rate from the surface of freshly laid flat concrete.
-
$687.50MasterSeal 20L Slab Sealant
Internal & external clear satin sealer with traction enhancement. MASTERSEAL concrete sealer is a roller applied film forming sealer, providing a satin, UV stable, wet-look finish with integral traction enhancement for non-slip.
-
$929.29Conqor Protect – Curing, Waterproofing, Densifying
Conqor Protect is a spray – applied colloidal silica treatment that penetrates deep into concrete to identify and address weaknesses, control moisture migration, and boost durability and is suitable for both interior and exterior use.
-
$267.19Water Bunding Tube 150mm
Casta’s Water Bunding plastic tubing is used to pool water around fresh concrete pours as the ultimate curing method. 150mm x 250m
-
$138.46Surface Retarder 20L (<20 Mpa)
Inforce’s concrete surface retarder is recommended to be used on concrete with strengths under 20 Mpa. Applied to the surface of the freshly poured concrete, Surface Retarder delays the normal hydration of the top 3-6mm of the cement whilst the concrete beneath hardens. Waterblast or broom off the top layer for an exposed aggregate finish.
-
$132.48Surface Retarder Plus 20L (20 – 40 Mpa)
Inforce’s concrete surface retarder is recommended to be used on concrete with strengths between 20 and 40 MPa and on concrete under 20MPa in hot weather. Waterblast or broom off the top layer for an exposed aggregate finish.
-
$120.78Surface Retarder Ultra 20L (40+ Mpa)
Inforce’s concrete surface retarder is recommended to be used on concrete with strengths over 40 Mpa.
